$("#temp1").Slide({
effect : "scroolY",
speed : "normal",
timer : 3000
});
Products List
Contact Us
DALIAN JINA BEARING Co.,Ltd.
Add: No.2 Baoding Street, Zhongshan District, Dalian,116001, Liaoning Province, China
Contact Person: Ms. Grace Wang
Tel: 0086-411-82609220
Fax: 0086-411-82609221
Skype:
。。。。。
Email: grace@jina-bearing.com
You are here: Home > Products
-
-
Four point Contact Ball Bearing
Four point contact ball bearings are separable bearings, in which, type QJ0000 has two piece inner ring, type QJF0000 has two piece outer rings, their contact angle are both 35°. When carrying pure radial loads, each ball cotacts with rings ar four point,
-
-
Angular Contact Ball Bearings
The single row angular contact bearings can support the axial load in one specific direction. Its axial loading capacity depends on the contact angle α. The bigger the contact angle is, the higher its axial bearing capacity is. The typical contact angle
-
-
Thrust Roller Bearinsg
Cylindrical Roller Thrust Bearings
Features:Inner Diameter: 180-1280mm Outer Diameter; 280-1400mm Weight: 13.4-2140kg
Tapered Roller Thrust Bearings
Features:Inner Diameter; 200-380mm Outer Diameter: 400-670mm Weight: 75-274kg
-
-
Spherical Roller Bearings
Popular sizes in stock
Available with bronze or steel cage
C3 clearance provided as standard
Features:Inner Diameter: 150-1060mm Outer Diameter: 225-1400mm Weight: 8.91-1020kg Type: 20000C, 20000C/W33, 20000CA/W33
-
-
Four Row Tapered Roller Bearings
Four row tapered roller bearings are the one kind of roll neck bearings, their radial and axial loading capacity are high, can carry heavy axail loads in two directions, and their radial loading capacity is 3 times heavier than single row tapered roller b
-
-
Double Row Tapered Roller Bearings
he double-row taper roller bearing is mainly used to support the combined load which is mianly consisted of radial load. It can restrict the axial displacement of the shaft or housing in the two directions. Application:rolling mills, gearboxes, hoisting e
-
-
crossed-cylindrical-roller-slewing-bearings
Slewing Bearings
For No Gear Type
Inner Diameter: 320-4272mm , Outer Diameter: 550-4726mm , Weight: 85.6-3100kg
-
-
Deep Groove Ball Bearings
Deep Groove Ball Bearings
-
-
Thrust Ball Bearings
Single direction thrust ball bearing consist of one row of balls ( with cage ), a shaft washer ( close fit with shaft ) and a housing ring ( loose fit with shaft and close fit with bore of bearing block ). They can not carry radial loads but axial loads i
-
-
Double Row Cylindrical Roller Bearings
The double-row cylindrical roller bearing has two optional structures: cylindrical bore and tapered bore(suffix K),and two optional designs: NNU and NN. The NN design has an inner ring with two ribs and an outer ring without ribs. The NNU design has an in